To get your technological item to operate again, sometimes all you need is a little patience. This troubleshooting guide should hopefully help you get started with your ij.start.canon TS9120. From Canon Pixma TS9120 Wireless Printer Setup to using print software, this article will walk you through the full printing process. Getting started with your new Canon TS9120 printer can be challenging. The troubleshooting lesson to set up and print the first page of your manuscript.
What does ij.start.canon TS9120 mean for?
The ij.start.canon TS9120 is a three-inch, quad-antenna cellular phone tower that uses the Verizon network to provide and receive wireless broadband internet services. This is a Wi-Fi printer that can print photos, maps, and other documents from any internet-connected device. It can also print to any standard paper size without the need to scan or fax. It is easy to put up and may be utilised on any flat surface without the usage of cords. With a range of up to 1500 feet in diameter, this gadget may be set almost anyplace in your home or office.
ij.start.canon TS9120 Setup Requirements
A Canon TS9120 photocopier with high-speed printing capabilities is a high-end photocopier. This product must be set up to deliver the best possible performance. For this product to work properly, a few prerequisites must be met during the Canon Pixma TS9120 Wireless Printer Setup process. To begin, the device requires a power supply that can deliver at least 20 volts. It must also be linked to the internet via an ethernet cable or a Wi-Fi connection. Finally, a high-speed internet connection capable of streaming video and high-resolution images is required. Before you buy the ij.start.canon TS9120, make sure you have everything you'll need to set it up. You'll need a computer with an internet connection, a printer, and a scanner to set up the gadget.
Setup Instructions for IJStart TS9120
The Canon TS9120 printer is simple to turn on. To make things easier, the directions are written in an easy-to-follow format. Connect the USB cord that came with the printer to any available USB port on your computer to get started. Then, to install the essential software, you'll be directed to a CD that came with your new Canon TS9120 printer. With only a few clicks, you can set up your new printer.
Before you begin the installation method on your Canon TS9120, you must first charge the battery. Plugging the power cord into a power source, such as a wall socket or a car charger, does this. You'll also need an SD card reader if you want to save photos to an external storage device. After connecting through Bluetooth, download and open the IJStart TS9120 app on your phone.
The ij.start.canon Troubleshooting Process TS9120
You must first collect the necessary tools before beginning the Canon TS9120 Setup procedure. A screwdriver and a forklift are required to install the printer head. A new colour ribbon and electrical wiring are also required. To complete the configuration, you can use or let the printer produce an error page on its own. Although there are multiple steps in the setup process, they may be easily classified into three categories:
1) Mount the camera on a tripod and set it up.
2) Setting up a link between the camera and the computer
3) Uploading footage after the link has been established. Remove your tripod and set it down on a stable surface. Then, in the proper slots on your computer, plug in the camera's power cord and USB cable.
A printer troubleshooting technique will ensure that any problems that arise are resolved. This procedure will also help you figure out what's wrong so you can fix it as quickly as possible.
Setup Canon Printer on Windows (Wireless) – Canon ij Setup Guide
The first step is to download and install the driver for your printer via ‘Ij.start.canon’.
Make sure to turn off the Canon printer and ensure that it’s properly connected using an on/off switch.
After that then, open the downloaded version of driver setup, and then follow the steps until the moment you get to screen with the option of selecting “Wireless Setup”.
Once you have selected WiFi, open your Canon printer’s screen, and then tap the WiFi setting button.
Set the device’s settings, then click OK.
Next, choose Device Settings>LAN Settings. Then, press “OK”
LAN Settings>Wireless Lan Setup, and select OK. Your printer will then look for an access point.
Make sure you’re WiFi router is on. Now, the WiFi flash light will light up on the printer.
A network list will be displayed on screen. Choose the WiFi networks from that list, then click on OK.
It will then ask you for your WPA/WEP code (WiFi password). Enter your password correctly in the box and then click on the “OK” button
Within a matter of seconds, the printer will be connected to the WiFi network.
Therefore, following the steps above, you can effortlessly finish Canon ij wireless setup for your Windows system.